Wednesday, 16 September 2015

Managerial Economics & Business Ethics Answer Sheets. KSBM - 9902787224 - 9901366442

WE PROVIDE CASE STUDY ANSWERS, ASSIGNMENT SOLUTIONS, PROJECT REPORTS AND THESIS

ARAVIND - 09901366442 – 09902787224

 Managerial Economics

Case Study 1: Economic Analysis of Organization ABC


Organization ABC was one of the leading organizations in manufacturing soaps. After a certain point of time, the organization found that there was an increase in its cost and reduction in profits. However, the economy of the nation was at boom. Apart from this, the manufacturing industry was also enjoying high profits. Therefore, Chief Executive Officer (CEO) of the organization decided to take suggestions from economists regarding the deteriorating condition of the organization. The economists first analyzed the problem and collected relevant data. They found that the price of the organization’s product was quite high as compared to the market price. Moreover, substitute products were easily available in the market. Therefore, consumers were not willing to purchase ABC’s product due to the availability of similar products at cheap prices. To overcome the problem, economists suggested the organization to lower down its prices and observe the effect on demand. In addition, economists recommended the organization to organize promotional campaigns. Based on suggestions, the organization reduced the prices by 5% and organized various promotional campaigns, As a result, the demand for the organization’s product increased by 3%. This helped the organization to come back to its previous position.

Questions:

Q1. Which economic theory is used to solve the problem in the case study?

Q2. Which economics concept is used in this case study?

 

Case Study 2: Kingfisher Airlines Pricing Strategies


Kingfisher Airlines (KFA), India-based airline group, is a wholly owned subsidiary of United Breweries (UB) Group. The parent organization is India’s largest producer of beer and established its operations in India in 2005. KFA is positioned as a budget airline rather than a low cost carrier airline. The reason is that the low cost carrier airline is treated as low quality and delayed flight service provider. The passengers of KFA are treated as honored guests and the flight is not referred as a journey but an experience of a lifetime. During the launch, Vijay Mallya, chairman and Chief Executive Officer (CEO) of KFA, said “Kingfisher Airlines will have a ‘Fly the Good Times’ approach and this will reflect in the experience what we will offer to passengers. With costs lower than economy class travel on full service airlines and marginally more than the bus services type low cost competition, Kingfisher Airlines offers a far better value proposition. The aircraft and service will reflect the Kingfisher lifeline imagery and credibility that has been built over the years.” KFA’s strategy is to differentiate itself from other airlines by providing value-added air travel services at reasonable fares. KFA offers three kinds of services for different types of customers namely Kingfisher First for business-class customers, Kingfisher Class for upper-class customers, and Kingfisher Red for middle-class and lower-class customers. It provides a fun-filled experience with in–flight entertainment systems and well-designed interiors. KFA provides quality services, screens and headphones, specialized meals and beverages, and free gifts to guests. In the year of its launch, KFA was voted as the best new airline of the year. KFA has an advantage of familiarity of brand with the customers. Thus, it does not conduct marketing and promotional activities. The pricing strategy of the aviation industry is also affected by the environment-related factors, such as crude oil prices, dollar rates, and competition. When KFA was launched, it was called as the budget airline as the ticket prices charged, were lower than its competitors, such as Indian Airlines, Jet, and Sahara. The ticket prices were 25% lower than Jet Airways and around `20% more than Air Deccan. Jet Airways brought down its fares to compete with KFA when it took over Sahara Airlines. These competitive price pressures lead KFA to provide more value-added services, including mobile updates and home delivery of air tickets. According to Mallya, “We are offering our passengers’ more than just value-based fares; we will offer a complete lifestyle experience.” In this high competition, KFA has positioned itself as a successful airline in a shorter period of time. The targeted segments of KFA are high and middle income customers. It also targeted the youth and high lifestyle segments. Mostly, the targeted population is modern and trendy that is looking for a great flying experience. It has been termed as a true value carrier and awarded as the prestigious 5- Star Airline Status by Skytrax, which is the world’s leading independent research and quality evaluation body for airlines.

Questions:

Q1. What pricing strategy was followed by Kingfisher to complete in the aviation industry? Was it competition or cost-based strategy?

Q2. Do you think that pricing acts as a differentiating factor in the aviation industry?


Case Study 3: The Business Cycle of ABC Country


ABC country was facing a downturn in its economy. All the economic factors, such as production, prices, savings, and investment, of the country started decreasing. In the initial phases of downturn, businessmen were not able to recognize it. They considered it minor fluctuations in the economy, which could be easily handled by market forces. Therefore, they continued to produce goods and services at the same rate as they were doing earlier. As a result, the supply of goods and services exceeded the demand. Gradually, businessmen realized that they had overinvested. This problem of one industry spread in other industries, due to interlink among different industries. At this time, businessmen stopped any type of further investment in consumer and capital goods. Consequently, they started reducing the cost on labor, machinery, furniture and other factors of production. As a result, various economic factors, such as consumption, savings, and employment, started decreasing. In addition, debtors were not able to repay their debts and creditors were not ready to lend more money. Apart from this, individuals and businesses were not ready to invest in stock markets. Many weak organizations left industries or dissolved. At this point of time, the economy had reached its bottom level and from this point, individuals and organizations tried to become optimistic. Therefore, organizations started hiring employees at low wages. Employees accepted the amount of salary provided to them by organizations because they wanted to fulfill their basic needs. In addition, consumers also had an opinion that the price of products and services would not fall now. Therefore, they started increasing their consumption rate. This consumption rate stimulated the demand and consequently the production. As a result, the investment and bank credit also increased. The economy started running back on the growth path.


Questions:

Q1. What are the phases of business cycle explained in the case study?

Q2. What are the main causes of recession in ABC country?
 Case Study 4: Russian Economy from 1990 to 2007

The Russian Federation (Russia) faced several economic problems when it was formed after the dissolution of Union of Soviet Socialist Republic (USSR) or the Soviet Union. Therefore, Boris Yeltsin the first President of Russia implemented various measures for the economic growth of Russia, such as stabilization policies and economic restructuring. These measures helped the Russian economy to become market-focused economy from a centrally planned economy. These measures are briefly discussed in the present case study. In addition, the case study also analyzes the policy measures presented by Vladimir Putin, Russia’s second President. It also focuses on the economic conditions of Russia in the Presidency of Boris Yeltsin and Vladimir Putin and the impact of their policies on the economy. Towards the end, the case study highlights the challenges faced by the Russian economy. Several Russian officials and economists have described the economic conditions of Russia in different time period as follows: According to Mark Spelmen, Accenture Energy Analyst, in July 2007, “Everyone is focusing on the fact that there are more billionaires in Moscow than there are in London, but what we’re actually also seeing is that the disposable income of skilled people in Russia is going up. You see a lot of infrastructure a lot of housing, shopping malls. The commodity boom is now percolating beyond Moscow.” According to prominent Russian intellectuals in the late 1990s, “The catastrophe has run its course. The economic policy of Yeltsin’s and Chernomyrdin’s aides has made a small section of the farmer communist nomenclature and of the “new Russians” unbelievably rich, plunged most of the nation’s industry into paralysis, and reduced the majority of the population to poverty. As far as property ownership is concerned, the gap between the rich and poor is much deeper now than that which led to the [1917] October [Bolshevik] Revolution.” Earlier to 1991, Russia was considered as the biggest republic with the name Russian Soviet Federative Socialist Republic (RSFSR) in Soviet Union. In 1990-1991, the inflation rate in Russia was very high and there was a shortage of supply in every industry. At the time, the GDP of Russia shows a decline of 17% and retail prices reached to 140%. The political conditions of Russia were also not good at this time. As a result, the Soviet Union was dissolved in 1991. After that, Boris Yeltsin was elected as the President of Russia. Boris Yeltsin took several measures to transform the Russian economy in the market-based economy. In 1991, Boris Yeltsin along with his advisors and an economist, Yegor Gaidar implemented certain measures for bringing up the Russian economy form inflation. The measures taken by him were stabilization measures and economic restructuring. The stabilization measures involved decreasing the government budget deficit, increasing government revenues, and controlling the supply of money by subsidizing credit provided to business persons. In addition, he enforced price control policies, made several amendments in tax policies, and increased privatization. In the initial stages, the policies made by Boris Yeltsin were not able to achieve its goals. However, with the introduction of monetary and fiscal policies, the government was able to implement such measures and achieved its goals and objectives. In 1996, Boris Yeltsin was again elected as the President of Russia. After that, Russia faced a situation of decrease in the foreign exchange reserves and the economy started showing another decline. In 1998, Russian economy experienced a financial crisis in which its currency, ruble, showed a decline of 75%. The financial crisis in Russia made people against Boris Yeltsin; as a result, he faced high opposition in the parliament. The State Duma elections of 1999 and Presidential elections of 2000 brought a major change in the Russian politics. Vladimir Putin was elected as the President of Russia on 2000. The Parliament of Russia started supporting policies introduced by Vladimir Pultin, the President of Russia and Mikhail Kasyanov, the Prime Minister of Russia. Both of them look various legislative initiatives and measures to transform the Russian economy in the market-based economy. In 2007, the Gross Domestic Product (GDP) of Russia was above $1 trillion. In the mid of 2000s, the growth of Russian economy was very fast that is mostly contributed by the growth in domestic energy industry of Russia. According to various Russian analysts, the major source of income for the Russian economy was oil exports. Therefore, the Russian economy showed a drastic change with the change in the prices of oil. Therefore, the decline in oil prices was considered as a risk factor for the sustainability of the Russian economy. According to the report of World Bank in 2007, Russia should have taken measures to control inflation as the global economy was going to face an inflationary condition, which might affect the Russian economy. However, Russia was the least affected country in the global economic slowdown of 2007. It is because of the fact that the major contribution in GDP of Russia came from its fossil fuels and natural resources that were hardly affected by recession. In addition, Russian trade with United States, which is the source of financial crisis of 2007, was very limited.

Questions:

Q1. What are the measures adopted by Boris Yeltsin to overcome inflation?

Q2. What are the measures used by a government for controlling inflation?

 Case Study 5: Competition in Magazine Industry


Earlier, there were only few organizations operating in the magazine publication industry. At that time, it became a trend to provide free gifts, audio and video CDs, DVDs, and scented candles, to customers along with magazines. The concept of free gifts was introduced to increase customer base. However, after some time, it became a problem for the entire industry as he cost of production was increasing. In such a situation, some organizations stopped providing free gifts, so that the cost of production could be reduced. Consequently, these organizations lost their customers. This is because at this point, customers preferred free gifts with magazines. On the other hand, some organizations increased the prices of magazines to overcome the cost of production. However, these organizations did not succeed in their strategy, as the customers were not willing to buy magazines at higher prices. Even some of the organizations reduced the prices of magazines to increase the number of customers, generate revenue, and overcome the production cost. As a result, rest of the organizations in the industry also reduced their prices to earn profit and minimize cost of production. This led to heavy losses for organizations that initially reduced the prices. Therefore, organizations were bound to provide magazines at fixed rate along with free gifts.

Questions:

Q1. What type of market structure is prevailing in the magazine industry? Why?

Q2. What are the problems faced by organizations in the magazine industry due to oligopoly?

 WE PROVIDE CASE STUDY ANSWERS, ASSIGNMENT SOLUTIONS, PROJECT REPORTS AND THESIS

ARAVIND - 09901366442 – 09902787224

 
Business Ethics


Case 1: KFC (Marks 20)

Abstract

The case highlights the ethical issues involved in Kentucky Fried Chicken's (KFC) business operations in India. KFC entered India in 1995 and has been in midst of controversies since then. The regulatory authorities found that KFC's chickens did not adhere to the Prevention of Food Adulteration Act, 1954. Chickens contained nearly three times more monosodium glutamate (popularly known as MSG, a flavor enhancing ingredient) as allowed by the Act. Since the late 1990s, KFC faced severe protests by People for Ethical Treatment of Animals (PETA), an animal rights protection organization. PETA accused KFC of cruelty towards chickens and released a video tape showing the ill-treatment of birds in KFC's poultry farms. However, undeterred by the protests by PETA and other animal rights organizations, KFC planned a massive expansion program in India.
BACKGROUND OF KENTUCKY FRIED CHICKEN
KFC is based in Louisville, Kentucky, and is the world’s most popular chicken restaurant chain. Founded by Colonel Harland Sanders in the early 1930s by cooking & serving food for hungry travelers. In 1952 Sanders started franchising his chicken business & named it as Kentucky Fried Chicken. KFC is part of Yum! Brands, Inc., the world's largest restaurant company in terms of system restaurants, with more than 36,000 locations around the world. Yum! Brands is run by David Novak, Chairman & CEO. KFC operates more than 5,200 restaurants in the United States and more than15,000 units around the world.109 countries and territories around the world. Every day, more than 12 million customers are served at KFC restaurants. KFC Division is run by Cheryl Bach elder, President and Chief Concept Officer.
KFC’s Entry in INDIA
KFC was the first fast food multinational to enter INDIA, after the economic liberalization policy of the Indian Govt. in early 1990s. KFC received permission to open 30 new outlets across the country & Opened first fast food outlet in Bangalore in June 1995 by targeting upper middle class population. PepsiCo planned to open 60 KFC and Pizza Hut outlets in next 7 yrs in the country.
Issues:
Understand the significance of cultural, economic, regulatory and ecological issues while establishing business in a foreign country. Appreciate the need for protecting animal rights in developed and developing countries like India. Understand the importance of ethics in doing business. Examine the reasons for protests of PETA (People for Ethical Treatment of Animals). Identify solutions for KFC's problems in India
Problems for KFC ·
Protests by farmers led by the Karnataka Rajya Ryote Sangha (KRRS) & the farmer’s leader was Nanjundaswamy who used the term “junk food” against KFC.
· Protests by cultural & Economic activists.
· Protests by PETA in the late 1990s.
· Support of celebrities in against of KFC.
 SWOT ANALYSIS Strengths
· Understand the Culture, Regulatory & Ecological issues.
· Understand the importance of Ethics in doing business
· Examine the reason for protests of PETA
· Identify Solutions for KFC‟S Problems in India.
Weaknesses
· Non Ethical business practice.
· PETA Protest. · KRRS Protest.
· MSG flavour in chicken.
Opportunity
· Retail boom in India.
· Indians youth are adopting western culture.
· Indian Economy.
· Cosmopolitan Rapid Development.
Threats
· MSG chicken flavour.
· PETA like organizations.
· Political parties Protesting for junk foods.
· Protest support from famous Personalities like Anil Kumble, Aditi Govithrikar, John Abraham etc.

Questions:
1. Since its entry in India in 1995, KFC has been facing protests by cultural & Economic activists and farmers. What are the reasons for these protests?

2. Do you think in the light of fierce competition, it is justified for business organizations not to give importance to ethical values at the cost of making profits? Why or Why not?

 CASE 2: THE NEW MARKET OPPORTUNITY (Marks 20)


FACTS OF THE CASE China was eager to enter joint ventures with foreign companies to construct and operate automobile manufacturing plants inside China. The plants would not only manufacture cars to supply China’s new internal market, but could also make cars that could be exported for sale abroad and would be sure to generate thousands of new jobs. The Chinese government specified that the new car had to be priced at less than $5000, be small enough to suit families with a single child (couples in China are prohibited from having more than one child), rugged enough to endure the poorly maintained roads that criss-crossed the nation, generate a minimum of pollution, be composed of parts that were predominantly made within China, and be manufactured through joint – venture agreements between Chinese and foreign companies. Experts anticipated that the plants manufacturing the new cars would use a minimum of automation and would instead rely on labor – intensive technologies that could capitalize on China’s cheap labor. China saw the development of a new auto industry as a key step in its drive to industrialize its economy. The Chinese market was an irresistible opportunity for General Motors, Ford and Chrysler, as well as for the leading Japanese, European and Korean automobile companies. With a population of 1.2 billion people and almost double digit annual economic growth rates, China estimated that in the next 40 years between 200 and 300 million of the new vehicles would be purchased by Chinese citizens. Already cars had become a symbol of affluence for China’s new rising middle class, and a craze for cars had led more than 30 million Chinese to take driving lessons despite that the nation had only 10 million vehicles, most of them government – owned trucks. Environmentalists, however, were opposed to the auto manufactures’ eager rush to respond to the call of the Chinese government. The world market for energy, particularly oil, they pointed out, was based in part on the fact that China, with its large population, was using relatively low levels of energy. Critics pointed out that if China were to eventually have as many cars on the road per person as Germany does, the world would contain twice as many cars as it currently does. No matter how “ pollution – free” the new car design was, the cumulative environmental effects of that many more automobiles in the world would be formidable. Even clean cars would have to generate large amounts of carbon dioxide as they burned fuel, thus significantly worsening the greenhouse effect. Engineers pointed out that it would be difficult, if not impossible, to build a clean car for under $5000. Catalytic converters, which diminished pollution, alone cost over $200 per car to manufacture. In addition, China’s oil refineries were designed to produce only gasoline with high levels of lead. Upgrading all its refineries so they could make low-lead gasoline would require an investment China seemed unwilling to make.
IDENTIFICATION OF ISSUES / PROBLEMS IN THE CASE
China was eager to enter joint ventures with foreign companies to construct and operate automobile manufacturing plants inside China. The Chinese government had specified that the new car had to be priced at less than $5000, be small enough to suit families with a single child (couples in China are prohibited from having more than one child), rugged enough to endure the poorly maintained roads that criss-crossed the nation, generate a minimum of pollution, be composed of parts that were predominantly made within China, and be manufactured through joint – venture agreements between Chinese and foreign companies. Environmentalists, however, were opposed to the auto manufactures. Engineers pointed out that it would be difficult, if not impossible, to build a clean car for under $5000 because Catalytic converters, which diminished pollution, alone cost over $200 per car to manufacture. In addition, China’s oil refineries were designed to produce only gasoline with high levels of lead. Upgrading all its refineries so they could make low-lead gasoline would require an investment China seemed unwilling to make. Many government officials were also worried by the political implications of having China become a major consumer of oil. If China were to increase its oil consumption, would have to import all its oil from the same countries that other nations relied on, this would create large political, economic and military risks.
INDIVIDUAL OPINION
I think China should enter joint ventures with foreign companies to construct and operate automobile manufacturing plants. This would not only generate the Chinese economy to boost up but will also generate a lot of employment opportunities to the Chinese population. Also having a car which is priced at less than $5000, will suit families with a single child. So the requirement will also not fulfill only the middle class but also the poor class in some time to come. Also looking from the point of view that the arrangement for making new cars will not only cater to the Chinese internal market but also be exported to other countries. This will get foreign exchange for China which will enhance the economy.
 Questions:

1. In your judgment, is it wrong, from an ethical point of view, for the auto companies to submit plans for an automobile to China? Explain your answer?

2. Of the various approaches to environmental ethics outlined in this chapter, which approach sheds most light on the ethical issues raised by this case? Explain your answer.

3. Should the US government intervene in any way in the negotiations between US auto companies and the Chinese government? Explain.

 SECTION B (Marks 40)

Attempt any 04 questions:
1. Distinguish ethical decision making from other practical decision situations.

2. Discuss the role of mission statements and codes in creating an ethical corporate culture.

3. Describe the three key concerns of ethical analysis of marketing issues.

4. Explain why ethics is important in the business environment.

5. Discuss the need for ethics in performance appraisal.

 WE PROVIDE CASE STUDY ANSWERS, ASSIGNMENT SOLUTIONS, PROJECT REPORTS AND THESIS

ARAVIND - 09901366442 – 09902787224 

Total Quality Management. 9901366442 - 9902787224

WE PROVIDE CASE STUDY ANSWERS, ASSIGNMENT SOLUTIONS, PROJECT REPORTS AND THESIS


ARAVIND - 09901366442 – 09902787224


Total Quality Management




1. In Total Quality Management, what does the ‘Quality’ word mean?
a) Degree of excellence a product or service
b) Degree of performance
c) Degree of work`
d) Strength of the company
2. Quality can be quantified as :
a) Q = P % E
b) Q = P / E
c) Q = P * E
d) None
Where P = Performance, and E = Expectations
3. What could be the dimension of Quality?
a) Conformance
b) Durability
c) Aesthetics
d) All above
4. An effective TQM program is often referred to as :
a) Listening to the voice of consumers
b) Listening to the voice of customers
c) Both (a) & (b)
d) None

5. The most important consideration of an effective TQM is
a) Maximize profit
b) Provide high quality
c) Customer satisfaction
d) Minimize expenses
6. Who said this, “Even if you’re on the right track, you’ll get run over if you just sit there.”
a) Will Rogers
b) Shewhart
c) Joseph M. Juran
d) Phillip B. Crosby
7. “……………….” is we, not me; mission, not my show; vision, not division; and community,
Not domicile.”
a) Democracy
b) Membership
c) Management
d) Leadership
8. Knowledge is what to do; the desire is the motivation or wants to do; and the skill is the…..
a) When to do?
b) How to do?
c) What to do
d) None
9. A body of principles or standards of human conduct that govern the behavior of individuals &
organizations.
a) Synergy
b) Ethics
c) Conduct
d) Nature
10. Quality is judged by
a) Manager
b) Director
c) Government
d) Customers
11. A desired future stage of an organization is
a) Policies
b) Mission
c) Value
d) Vision

12. A customer could be
a) Internal
b) External
c) Both (a) & (b)
d) None
13. A particular tool for obtaining opinions & perceptions about organizations its products &
services.
a) Customer questionnaire
b) Personal interview
c) Telephonic interview
d) All above
14. Clients are the people for whom the company doing the survey, and customers are the ones
a) Who checks the product or services
b) Who use the product or services
c) Who takes the information about product
d) None
15. 90% of all customers contact comes through an organization’s
a) Front – line employees
b) Back – line employees
c) Manager
d) Director
16. The connection between customers satisfaction and the bottom line is
a) Customer interest
b) Customer retention
c) Customer requirement
d) None
17. A useful tool which provides information to improve processes an establish realistic goals
a) SERVQUAL
b) Quality function deployment
c) Gap analysis
d) None
18. Who said, “Customer don’t buy products, they buy result.”
a) Joseph J. Juran
b) Phillip B. Crosby
c) Peter Drucker
d) Will Rogers

19. A document that defines the team’s mission, boundaries, the background of the problem, team’s
authority, duties and resources.
a) Sponsor
b) Team charter
c) Team manager
d) Team leader
20. When one person proposes a decision and another agrees, we have the
a) Non-decision
b) Minority rule decision
c) Unilateral decision
d) Handclasp decision
21. Item that includes a process, such as brainstorming, affinity diagram, discussion, the presenters
and times guidelines is
a) Company’s logo
b) Company’s Name
c) An agenda
d) Moto
22. The most difficult stage as members start to realize the amount of works that lies ahead is
a) Forming
b) Worming
c) Performing
d) Storming
23. The S.T.A.R. = ‘Suggestions’, ‘Team’, ‘Actions’, ‘…………..’.
a) Response
b) Reliability
c) Results
d) None
24. An ongoing process that must occur if an organization is to continue to exist in the competitive
world is
a) Change
b) Repair
c) Revenue
d) None
25. The planning component of process involvement begins with
a) Internal customers
b) External customers
c) Both (a) & (b)
d) None

26. Which problem occurs, when a structured system having standardized inputs, processes, and
outputs is performing unacceptably from the user’s view point?
a) Unstructured problems
b) Product design problems
c) Compliance problems
d) Process design problems
27. PDSA stands for
a) Plan – Do – Study – Act
b) Process Development Structured Analysis
c) Both (a) & (b)
d) None
28. Kaizen improvement focuses on which principle to produce only the units in the right quantities,
at the right time, and with the right resources.
a) Do – it – fast
b) Just – in –time
c) Both (a) & (b)
d) None
29. The Greek symbol for the statistical measurement of dispersion called standard deviation
a) α
b) β
c) λ
d) σ
30. Competency levels of six sigma individuals use the Karate designations of
a) Green Belt
b) Black Belt
c) Master Black Belt
d) All above
31. The key element to a partnering relationship is
a) Long – term commitment
b) Trust
c) Shared vision
d) All above
32. Sourcing, which is the use of two or more suppliers for an item is
a) Sole sourcing
b) Multiple sourcing
c) Single sourcing
d) None

33. The fourth and final phase, i.e., identity check occurs
a) When the customers perform identity checks
b) When the suppliers perform identity checks
c) When both the customers & suppliers perform identity checks
d) None
34. A supplier rating system is based on
a) Quality
b) Delivery
c) Service
d) All above
35. The score of a supplier can be calculated as
a) Performance matrix * price index
b) Target price * actual price
c) Performance matrix * actual price
d) None
36. OEMs must maintain supply chain development through
a) Zero defects
b) 100 % on time delivery
c) A process for continuous improvement
d) All above
37. A technique of ‘Performing Measure Presentation’ benchmarks the process & shows favorable &
unfavorable trends in the measure
a) Control chart
b) Time service graph
c) Capability index
d) Cost of poor quality
38. Costs can generally be considered the cost incurred for the inspection and/or test of purchased
suppliers or service to determine acceptability for use.
a) Operations appraisal costs
b) External appraisal costs
c) Miscellaneous quality evaluations
d) Purchasing appraisal costs
39. Purchasing failure cost are incurred due to
a) Defected item rejects
b) Purchased item rejects
c) Both (a) & (b)
d) None

40. The efficiency of a business is measured in terms of
a) Rupees
b) Paisa
c) Dollars
d) Pound
41. An annual award to recognize U.S. organizations for performance excellence
a) Golden Peacock Award
b) IMC Ramakrishna Bajaj National Award
c) Malcolm Baldrige National Award
d) None
42. In the implementation of a quality cost program, to determine if the program can be beneficial to
the organization is
a) Last step
b) First step
c) Second step
d) None
43. An increasingly popular tool, used extensively by both manufacturing & service organizations,
including Xerox, AT&T, Motorola, Ford & Toyota to reach at a target point
a) SERQUAL
b) Benchmarking
c) QFD
d) QC
44. When deciding what to benchmark, it is best to begin by thinking about the
a) Mission and vision
b) Vision and critical success factors
c) Vision
d) Mission and critical success factors
45. Benchmarking can be
a) Internal
b) Competitive
c) Process
d) All above
46. Technique of conducting original research is
a) Questionnaires
b) Site visits
c) Focus on groups
d) All above

47. Benchmarking is waste of time, if
a) Change does not occur as a result
b) Change occurs a result
c) There is no achievement
d) Can’t say
48. E – learning is offered in a variety of formats such as
a) CD – ROM based
b) LAN based
c) Web based
d) All above
49. The International Organization for Standardizations (ISO) was founded in Geneva, Switzerland,
in
a) 1952
b) 1948
c) 1961
d) 1946
50. The current quality system is
a) AS9100
b) ISO / TS 16949
c) TL 9000
d) All above
51. The supply chain is defined as
a) Suppliers 
 Organization  Customers
b) Organization 
 Suppliers  Customers
c) Suppliers 
 Customers  Organization
d) Organization 
 Customers  Suppliers
52. Which is not a step of ‘Implementation’ of a Quality Management System?
a) Top Management Commitment
b) Appoint an implementation team
c) Writing the documents
d) Appoint the management representatives
53. Technical committee 207 (TC 207) is formed by
a) RAB
b) SAGE
c) ASQ
d) None

54. What is the global benefit of environmental management system?
a) Facilitate & remove trade barriers
b) Improve environmental performance of planet earth
c) Build consensus
d) All above
55. ‘Closely knit’ describes
a) TNC’s eternal relationship
b) TNC’s internal relationship
c) Both (a) & (b)
d) None
56. ………………, a golf equipment manufacturer recently was certified to both ISO 9000 & ISO
14000.
a) Escorts
b) Hyundai
c) Ping
d) Tata
57. To ensure that EMS conforms to plans & is being properly implemented & maintained, is the
purpose of
a) Records
b) EMS Audit
c) Monitoring & Measuring
d) Nonconformance & Corrective
58. The Quality Function Deployment uses, to express information
a) Algebric values
b) Numeric values
c) Alphanumeric values
d) None
59. Quality Function deployment is a planning tool used to
a) Maximizing the profit
b) Minimizing the expenses
c) Fulfill customer expectations
d) Making goodwill
60. Which source of customers describes their expectations?
a) Voice of customers
b) Actions of customers
c) Nature of customers

61. Which method is well suited for gathering a large amount of data?
a) Interrelationship diagram
b) Tree diagrams
c) Cause – and – Effect diagrams
d) All above
62. The primary planning tool used in QFD is
a) QC
b) Gap Analysis
c) Benchmarking
d) HOQ
63. The absolute weight is calculated by
a) AW = (Importance to customer)*(scale up factor)*(sales points)
b) AW = (Importance to customer)*(scale up factor)
c) AW = (scale up factor)*(sales points)
d) None
64. Why the term ‘Sequential Engineering’ is used?
a) To describe the profit
b) To describe the process
c) To describe the performance
d) To describe the quality
65. The benefit of Quality by Design techniques is
a) Faster production development
b) Better quality
c) Less work in progress
d) All above
66. Tools which are mostly used in quality be design technique
a) CAD
b) CAM
c) Both (a) & (b)
d) None
67. A software which provides a means for individuals to communicate their opinions within a group
in a structured & creative manner is
a) Enterprise resource planning software
b) Product data management software
c) Electronic meeting software
d) None

68. The finite element analysis software packages are3 widely regarded as the most powerful tool
available for
a) A design engineer
b) Documentation
c) Production
d) All above
69. FMEA. Is an analytical technique to identify foreseeable failure modes of a product or process &
plan for their elimination stands for
a) Failure Modification & Effect Analysis
b) Foreign Money Exchange and Analysis
c) Failure Mode & Effect Analysis
d) None
70. The type of FMEA is
a) Design FMEA
b) Process FMEA
c) Equipment FMEA
d) All above
71. How many stages of FMEA?
a) 8
b) 6
c) 4
d) 3
72. The effective of failure as perceived by the customer are called
a) Minor effect(s) of failure
b) Potential effect(s) of failure
c) High effe4ct(s) of failure
d) All above
73. Which section of the document is a relative of the assessment of the ability of the design control
to detect either a potential cause or the subsequent failure mode before the component, sub
system, or system is completed for production.
a) Occurrence(O)
b) Classification (CLASS)
c) Detection (D)
d) Security (S)
74. The concept ‘Caveat Emptor’, that resulted from Adam Smith’s “invisible Hand” theory of
commercial regulation, means
a) Let the buyers beware
b) Let the seller beware

c) Let the consumer beware
d) Let the government beware
75. The first requirement of an expert technical witness is to be ……………………… in the area of
testimony.
a) Non – technical
b) Perfect
c) Technically competent
d) Knowledgeable
76. Technique, which is a product safety design technique is
a) Fault free analysis
b) Fail – safe concepts
c) Coded identifications for traceability
d) All above
77. If the product is referred to as “safe” & a person is injured that action establishes that the product
is
a) Good
b) Best
c) Defective
d) Not safe
78. A communication between market place and the organization concerning the performance of the
product is
a) A complaint
b) A claim
c) Both (a) & (b)
d) None
79. An adequate prevention program can substantially reduce the risk of damaging litigation. This
statement is as same as proverb
a) A ounce of prevention is worth a pound of cure
b) Barking dogs seldom bite
c) Old is gold
d) Two birds with single stone
80. The goal of TPM is
a) Maintaining & improving equipment capacity
b) Maintaining equipment for life
c) Encouraging input from all employees
d) All above

81. Operating time can be calculated as
a) T = P + D
b) T = D – P
c) T = P – D
d) T = P * D
Where P = Planned operating time, D = Downtime
82. A tool, which could be a key to finding the root cause of a problem by focusing on the process
rather than on people is
a) Brain storming
b) Why Why tool
c) CAM
d) Tree Diagram
83. A tool, which is used to reduce any broad objective into increasing levels of details in order to
achieve the objective is
a) Matrix Diagram
b) Tree Diagram
c) Brain storming
d) Why Why tool
84. Prioritization matrices based on weighted criteria using a combination of
a) Tree & Matrix Diagram
b) Tree & Affinity Diagram
c) Affinity & Matrix Diagram
d) Brainstorming & Why Why Tool
85. The tool which can be used in a wide variety of situations and are simple to use by individuals
and / or teams is
a) Why Why tool
b) Forced Field Analysis
c) Nominal Group Technique
d) All above
86. The activity network diagram is also known as
a) PERT
b) CPM
c) Arrow diagram
d) All above
87. PDPC stands for
a) Process Decision Program Chart
b) Practice Decision Program Chart
c) Process Development
d) Path Decision Process Chart

88. A Pareto diagram is a
a) Ending Process
b) Critical Process
c) Never Ending Process
d) Easy Process
89. Diagrams, which are used to investigate either a “bad” effect and to take action to correct the
cause that are effe4ct & to learn those causes that are responsible
a) Pareto diagrams
b) Tree diagrams
c) PERT diagrams
d) Cause & Effect diagrams
90. Which is the first “statistical” SPC technique?
a) Histogram
b) Ungrouped Data
c) Check Sheets
d) None
91. An arrangement of raw numerical data in ascending or descending order of magnitude is
a) Structure
b) Link List
c) Queue
d) Array
92. Statistics is defined as the science that deals with
a) Collection
b) Tabulation
c) Presentation
d) All above
93. Which tool of statistics describes how the data are spread out or scattered on which each side of
central value?
a) Measures of dispersion
b) Forced field analysis
c) Nominal group technique
d) Tree diagram
94. Experimental design can be used to
a) Improve a process by increasing its performance and
Eliminate troubles
b) Identify the variables to control the process
c) Improve an existing product or develop a new product
d) All above

95. A statistical decision making process in which inferences are made about the population from a
sample is
a) Hypothesis Testing
b) Orthogonal Design
c) t- reference Distribution
d) None
96. What does the word ‘Orthogonal’ mean?
a) The final product is experimented
b) The design of the actual product is based
c) The experimental design is balanced
d) None
97. In any statistical study, analysis & calculations yield a single point or value, which is called a
a) Point estimate
b) Analytical point
c) Full factor
d) None
98. Which is a stage of product development?
a) Process design
b) Product design
c) Production
d) All above
99. Which is the fundamental part of the Taguchi approach?
a) Iron casting
b) Grill
c) Parameter design
d) Confirmation run
100. An ongoing process that must occur if an organization is to continue to exist in the competitive
world is called
a) Change
b) Renewal
c) Enhancement
d) None


WE PROVIDE CASE STUDY ANSWERS, ASSIGNMENT SOLUTIONS, PROJECT REPORTS AND THESIS



ARAVIND - 09901366442 – 09902787224







ARAVIND
09901366442 – 09902787224


IIBM MBA CASE LET ANSWER SHEETS
MBA IIBM ANSWER SHEETS
IIBM EMBA CASE LET ANSWER SHEETS
EMBA IIBM ANSWER SHEETS
IIBM MIB ANSWER SHEETS
MIB IIBM CASE STUDY ANSWER SHEETS
DMS IIBM ANSWER SHEETS
IIBM DMS CASE STUDY SOLUTIONS PAPERS
IIBM CASE STUDY ANSWER SHEETS
IIBM MULTIPLE ANSWERS


ARAVIND
09901366442 – 09902787224